91³ÉÈ˰涶Òô

Professor Bronwyn Fox

Professor Bronwyn Fox

Professor
Research & Enterprise
Office of the DVC (Research)

Bronwyn commenced as Deputy Vice Chancellor Research and Enterprise at the UNSW in mid-July 2024. Prior to this, she was the Chief Scientist at CSIRO having previously held the position of Deputy Vice-Chancellor (Research and Enterprise) at Swinburne University. She is an internationally recognised expert on carbon fibre and composite materials and was the founding Director of Swinburne’s Manufacturing Futures Research Institute as well as Deakin’s Carbon Nexus facility.

In October 2023, Bronwyn was appointed by The Minister for Science and Industry as Australia’s Expert Adviser to the International Scientific Report on Advanced AI Safety, led by Yoshua Bengio. Professor Fox represents Australia at the Expert Advisory Panel alongside representatives from 30 countries including USA, Japan, Singapore, the EU and the UN.

Bronwyn is a former Chair of the Australian Academy of Technology and Engineering (Victorian Division), a Fellow of the Academy of Technological Sciences and Engineering, a Fellow of Engineers Australia, a Fellow of the Royal Australian Chemical Institute and a Graduate of the Australian Institute of Company Directors. Bronwyn was appointed by the federal government to serve as a member of the National Quantum Advisory Committee and was also appointed as Chair of the National Robotics Strategy Advisory Committee.

Bronwyn is the Honorary President of the German-Australian Chamber of Commerce and serves on the Board of Museums Victoria.

Ìý

Phone

+61 2 9065 7405

Location
UNSW Kensington Campus Chancellery Building Closest Gate: Gate 8, High St
  • Book Chapters | 2023
    Mimra C; Krein V; Radjef R; Fox B; Middendorf P, 2023, 'Detection ofÌýGaps andÌýOverlaps inÌýLaser Line Triangulation Data ofÌýDry Fibre Tape Layups Using Image Projection', in Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains, Springer International Publishing, pp. 253 - 265,
    Book Chapters | 2017
    Salim NV; Parameswaranpillai J; Fox BL; Hameed N, 2017, 'Thermal properties of epoxy/ block-copolymer blends', in Handbook of Epoxy Blends, pp. 1041 - 1065,
    Book Chapters | 2016
    Salim NV; Parameswaranpillai J; Fox BL; Hameed N, 2016, 'Thermal Properties of Epoxy/Block Copolymer Blends', in Handbook of Epoxy Blends, Springer International Publishing, pp. 1 - 25,
    Book Chapters | 2013
    Huson M; Church J; Kafi A; Khoo J; Mangalampalli K; Bradby J; Fox B, 2013, 'Physical and Chemical Heterogeneity of Carbon Fibre', in , Wiley, pp. 3339 - 3345,
    Book Chapters | 2001
    Otieno-Alego V; Creagh D; Jar B; Fox B; Lowe A, 2001, 'Characterisation of the Moisture Absorption and Thermal Ageing Behaviour of Polymeric Composite Systems Using Raman Spectroscopy', in Ageing Studies and Lifetime Extension of Materials, Springer US, pp. 113 - 121,
  • Journal articles | 2024
    Blythe A; Fox B; Nikzad M; Eisenbart B; Chai BX, 2024, 'Stiffness Retention in Cyclic-Loaded CFRP Composites Produced via Novel Automatic Tape Laying', Journal of Composites Science, 8,
    Journal articles | 2024
    Chai BX; Wang J; Dang TKM; Nikzad M; Eisenbart B; Fox B, 2024, 'Comprehensive Composite Mould Filling Pattern Dataset for Process Modelling and Prediction', Journal of Composites Science, 8,
    Journal articles | 2024
    Tran HTT; Nisha SS; Radjef R; Nikzad M; Bjekovic R; Fox B, 2024, 'Recyclable and Biobased Vitrimers for Carbon Fibre-Reinforced Composites—A Review', Polymers, 16,
    Journal articles | 2024
    Wang Y; Xu S; Bwar KH; Eisenbart B; Lu G; Belaadi A; Fox B; Chai BX, 2024, 'Application of machine learning for composite moulding process modelling', Composites Communications, 48,
    Journal articles | 2023
    Ackermann AC; Demleitner M; Guhathakurta J; Carosella S; Ruckdäschel H; Simon S; Fox BL; Middendorf P, 2023, 'Mechanical, thermal, and electrical properties of amine- and non-functionalized reduced graphene oxide/epoxy carbon fiber-reinforced polymers', Polymer Composites, 44, pp. 4937 - 4954,
    Journal articles | 2023
    Barnard AS; Fox BL, 2023, 'Importance of Structural Features and the Influence of Individual Structures of Graphene Oxide Using Shapley Value Analysis', Chemistry of Materials, 35, pp. 8840 - 8856,
    Journal articles | 2023
    Capricho JC; Liao TY; Chai BX; Al-Qatatsheh A; Vongsvivut J; Kingshott P; Juodkazis S; Fox BL; Hameed N, 2023, 'Magnetically Cured Macroradical Epoxy as Antimicrobial Coating', Chemistry - An Asian Journal, 18,
    Journal articles | 2023
    Chai BX; Eisenbart B; Nikzad M; Fox B; Blythe A; Blanchard P; Dahl J, 2023, 'A novel heuristic optimisation framework for radial injection configuration for the resin transfer moulding process', Composites Part A: Applied Science and Manufacturing, 165,
    Journal articles | 2023
    Chai BX; Eisenbart B; Nikzad M; Fox B; Blythe A; Bwar KH; Wang J; Du Y; Shevtsov S, 2023, 'Application of KNN and ANN Metamodeling for RTM Filling Process Prediction', Materials, 16,
    Journal articles | 2023
    Chai BX; Eisenbart B; Nikzad M; Fox B; Wang Y; Bwar KH; Zhang K, 2023, 'Review of Approaches to Minimise the Cost of Simulation-Based Optimisation for Liquid Composite Moulding Processes', Materials, 16,
    Journal articles | 2023
    Ozyurt D; Kobaisi MA; Hocking RK; Fox B, 2023, 'Properties, synthesis, and applications of carbon dots: A review', Carbon Trends, 12,
    Journal articles | 2023
    Zhang H; Fu Y; Nguyen HT; Fox B; Lee JH; Lau AKT; Zheng H; Lin H; Ma T; Jia B, 2023, 'Material challenges in green hydrogen ecosystem', Coordination Chemistry Reviews, 494,
    Journal articles | 2023
    Zhuang Z; Fox BL; Barnard AS, 2023, 'Simultaneous Prediction and Optimization of Charge Transfer Properties of Graphene and Graphene Oxide Nanoflakes from Multitarget Machine Learning', Journal of Physical Chemistry C, 127, pp. 22364 - 22377,
    Journal articles | 2022
    Ackermann AC; Carosella S; Rettenmayr M; Fox BL; Middendorf P, 2022, 'Rheology, dispersion, and cure kinetics of epoxy filled with amine- and non-functionalized reduced graphene oxide for composite manufacturing', Journal of Applied Polymer Science, 139,
    Journal articles | 2022
    Ackermann AC; Fischer M; Wick A; Carosella S; Fox BL; Middendorf P, 2022, 'Mechanical, Thermal and Electrical Properties of Epoxy Nanocomposites with Amine-Functionalized Reduced Graphene Oxide via Plasma Treatment', Journal of Composites Science, 6,
    Journal articles | 2022
    Blythe A; Fox B; Nikzad M; Eisenbart B; Chai BX; Blanchard P; Dahl J, 2022, 'Evaluation of the Failure Mechanism in Polyamide Nanofibre Veil Toughened Hybrid Carbon/Glass Fibre Composites', Materials, 15,
    Journal articles | 2022
    Blythe A; Fox B; Nikzad M; Eisenbart B; Chai BX, 2022, 'Stiffness Degradation under Cyclic Loading Using Three-Point Bending of Hybridised Carbon/Glass Fibres with a Polyamide 6,6 Nanofibre Interlayer', Journal of Composites Science, 6,
    Journal articles | 2022
    Capricho JC; Subhani K; Chai BX; Bryant G; Salim N; Juodkazis S; Fox BL; Hameed N, 2022, 'Porous macroradical epoxy-based supercapacitors', Polymer, 259,
    Journal articles | 2022
    Choi J; Zabihi O; Varley R; Zhang J; Fox BL; Naebe M, 2022, 'Multiple Hydrogen Bond Channel Structural Electrolyte for an Enhanced Carbon Fiber Composite Battery', ACS Applied Energy Materials, 5, pp. 2054 - 2066,
    Journal articles | 2022
    Choi J; Zabihi O; Varley RJ; Fox B; Naebe M, 2022, 'Enhancement of ionic conduction and mechanical properties for all-solid-state polymer electrolyte systems through ionic and physical bonding', Materials Today Chemistry, 23,
    Journal articles | 2022
    Choi J; Zabihi O; Varley RJ; Fox B; Naebe M, 2022, 'High Performance Carbon Fiber Structural Batteries Using Cellulose Nanocrystal Reinforced Polymer Electrolyte', ACS Applied Materials and Interfaces, 14, pp. 45320 - 45332,
    Journal articles | 2022
    Govindaraj P; Fuss FK; Tan AM; Weizman Y; Salim N; Sokolova A; Fox B; Hameed N, 2022, 'Graphene-Based Composite Foams with Tunable Porosity for Ultra-Sensitive Low-Pressure Applications', Macromolecular Materials and Engineering, 307,
    Journal articles | 2022
    Lux B; Fial J; Schmidt O; Carosella S; Middendorf P; Fox B, 2022, 'Development of a shear forming envelope for carbon fibre non-crimp fabrics', Journal of Industrial Textiles, 51, pp. 2089S - 2105S,
    Journal articles | 2022
    Motevalli B; Fox BL; Barnard AS, 2022, 'Charge-dependent Fermi level of graphene oxide nanoflakes from machine learning', Computational Materials Science, 211,
    Journal articles | 2022
    Motevalli B; Hyde L; Fox BL; Barnard AS, 2022, 'Predicting the Probability of Observation of Arbitrary Graphene Oxide Nanoflakes Using Artificial Neural Networks (Adv. Theory Simul. 5/2022)', Advanced Theory and Simulations, 5,
    Journal articles | 2022
    Motevalli B; Hyde L; Fox BL; Barnard AS, 2022, 'Predicting the Probability of Observation of Arbitrary Graphene Oxide Nanoflakes Using Artificial Neural Networks', Advanced Theory and Simulations, 5,
    Journal articles | 2022
    Reghat M; Fuss FK; Middendorf P; Bjekovic R; Hyde L; Hameed N; Fox B, 2022, 'Strain monitoring in reduced graphene oxide-coated glass fiber/epoxy composite', Polymer Composites, 43, pp. 7913 - 7927,
    Journal articles | 2021
    Capricho JC; Saubern S; Best SP; Maksimovic J; Gupta A; Juodkazis S; Fox BL; Hameed N, 2021, 'Macroradical enables electrical conduction in epoxy thermoset', Polymer, 230,
    Journal articles | 2021
    Chai BX; Eisenbart B; Nikzad M; Fox B; Blythe A; Blanchard P; Dahl J, 2021, 'Simulation-based optimisation for injection configuration design of liquid composite moulding processes: A review', Composites Part A: Applied Science and Manufacturing, 149,
    Journal articles | 2021
    Chan KY; Baktash A; Demir B; Mayes ELH; Yang D; Pham DQ; Lin KT; Mouritz AP; Ang ASM; Fox B; Zhu B; Lin H; Jia B; Lau KT, 2021, 'Tailoring mechanical and electrical properties of graphene oxide film for structural dielectric capacitors', Journal of Power Sources, 482,
    Journal articles | 2021
    Govindaraj P; Sokolova A; Salim N; Juodkazis S; Fuss FK; Fox B; Hameed N, 2021, 'Distribution states of graphene in polymer nanocomposites: A review', Composites Part B: Engineering, 226,
    Journal articles | 2021
    Khayyam H; Naebe M; Milani AS; Fakhrhoseini SM; Date A; Shabani B; Atkiss S; Ramakrishna S; Fox B; Jazar RN, 2021, 'Improving energy efficiency of carbon fiber manufacturing through waste heat recovery: A circular economy approach with machine learning', Energy, 225,
    Journal articles | 2021
    Ozyurt D; Shafqat S; Pakkanen TT; Hocking RK; Mouritz A; Fox B, 2021, 'Aggregation induced emission transformation of liquid and solid-state N-doped graphene quantum dots', Carbon, 175, pp. 576 - 584,
    Journal articles | 2021
    Radjef R; Jarvis KL; Fox BL; McArthur SL, 2021, 'Comparing the properties of commercially treated and air plasma treated carbon fibers', Surface and Coatings Technology, 408,
    Journal articles | 2021
    Radjef R; Jarvis KL; Hall C; Ang A; Fox BL; McArthur SL, 2021, 'Characterising a custom-built radio frequency pecvd reactor to vary the mechanical properties of tmdso films', Molecules, 26,
    Journal articles | 2021
    Reghat M; Mirabedini A; Tan AM; Weizman Y; Middendorf P; Bjekovic R; Hyde L; Antiohos D; Hameed N; Fuss FK; Fox B, 2021, 'Graphene as a piezo-resistive coating to enable strain monitoring in glass fiber composites', Composites Science and Technology, 211,
    Journal articles | 2020
    Capricho JC; Fox B; Hameed N, 2020, 'Multifunctionality in Epoxy Resins', Polymer Reviews, 60, pp. 1 - 41,
    Journal articles | 2020
    Chan KY; Pham DQ; Demir B; Yang D; Mayes ELH; Mouritz AP; Ang ASM; Fox B; Lin H; Jia B; Lau KT, 2020, 'Graphene oxide thin film structural dielectric capacitors for aviation static electricity harvesting and storage', Composites Part B: Engineering, 201,
    Journal articles | 2020
    Hung PY; Lau KT; Guo Q; Jia B; Fox B, 2020, 'Tailoring specific properties of polymer-based composites by using graphene and its associated compounds', International Journal of Smart and Nano Materials, pp. 173 - 189,
    Journal articles | 2020
    Mirabedini A; Ang A; Nikzad M; Fox B; Lau KT; Hameed N, 2020, 'Evolving Strategies for Producing Multiscale Graphene-Enhanced Fiber-Reinforced Polymer Composites for Smart Structural Applications', Advanced Science, 7,
    Journal articles | 2020
    Radjef R; Jarvis K; Fox BL; McArthur SL, 2020, 'Design and characterization of a plasma chamber for improved radial and axial film uniformity', Plasma Processes and Polymers, 17,
    Journal articles | 2019
    Fox B; Subic A, 2019, 'An Industry 4.0 Approach to the 3D Printing of Composite Materials', Engineering, 5, pp. 621 - 623,
    Journal articles | 2019
    Govindaraj P; Fox B; Aitchison P; Hameed N, 2019, 'A Review on Graphene Polymer Nanocomposites in Harsh Operating Conditions', Industrial and Engineering Chemistry Research, 58, pp. 17106 - 17129,
    Journal articles | 2019
    Hung PY; Lau KT; Fox B; Hameed N; Jia B; Lee JH, 2019, 'Effect of graphene oxide concentration on flexural properties of CFRP at low temperature', Carbon, 152, pp. 556 - 564,
    Journal articles | 2019
    Hung PY; Lau KT; Qiao K; Fox B; Hameed N, 2019, 'Property enhancement of CFRP composites with different graphene oxide employment methods at a cryogenic temperature', Composites Part A: Applied Science and Manufacturing, 120, pp. 56 - 63,
    Journal articles | 2019
    Jiang E; Maghe M; Zohdi N; Amiralian N; Naebe M; Laycock B; Fox BL; Martin DJ; Annamalai PK, 2019, 'Influence of Different Nanocellulose Additives on Processing and Performance of PAN-Based Carbon Fibers', ACS Omega, 4, pp. 9720 - 9730,
    Journal articles | 2019
    Marceau RKW; Taylor AS; Sato T; Ringer SP; Fox BL; Stanford N; Henderson LC, 2019, 'Local Electrode Atom Probe Tomography of Carbon Fibre', Microscopy and Microanalysis, 25, pp. 2496 - 2497,
    Journal articles | 2019
    Salim NV; Jin X; Mateti S; Lin H; Glattauer V; Fox B; Ramshaw JAM, 2019, 'Porous carbon fibers made from collagen derived from an animal by-product', Materials Today Advances, 1,
    Journal articles | 2019
    Salim NV; Mateti S; Cizek P; Hameed N; Parameswaranpillai J; Fox B, 2019, 'Large, Mesoporous Carbon Nanoparticles with Tunable Architectures for Energy Storage', ACS Applied Nano Materials, 2, pp. 1727 - 1736,
    Journal articles | 2019
    Sayyar S; Moskowitz J; Fox B; Wiggins J; Wallace G, 2019, 'Wet-spinning and carbonization of graphene/PAN-based fibers: Toward improving the properties of carbon fibers', Journal of Applied Polymer Science, 136,
    Journal articles | 2018
    Demir B; Beggs KM; Fox BL; Servinis L; Henderson LC; Walsh TR, 2018, 'A predictive model of interfacial interactions between functionalised carbon fibre surfaces cross-linked with epoxy resin', Composites Science and Technology, 159, pp. 127 - 134,
    Journal articles | 2018
    Hameed N; Dumée LF; Allioux FM; Reghat M; Church JS; Naebe M; Magniez K; Parameswaranpillai J; Fox BL, 2018, 'Graphene based room temperature flexible nanocomposites from permanently cross-linked networks', Scientific Reports, 8,
    Journal articles | 2018
    Hung PY; Lau KT; Fox B; Hameed N; Lee JH; Hui D, 2018, 'Surface modification of carbon fibre using graphene–related materials for multifunctional composites', Composites Part B: Engineering, 133, pp. 240 - 257,
    Journal articles | 2018
    Kashi S; Varley R; De Souza M; Al-Assafi S; Di Pietro A; de Lavigne C; Fox B, 2018, 'Mechanical, Thermal, and Morphological Behavior of Silicone Rubber during Accelerated Aging', Polymer - Plastics Technology and Engineering, 57, pp. 1687 - 1696,
    Journal articles | 2018
    Srivastava VK; Zamperlin N; Fox B; Pegoretti A, 2018, 'Effect of carbonization and multi-walled carbon nanotubes on polyacrylonitrile short carbon fiber - epoxy composites', Polymer Composites, 39, pp. E817 - E825,
    Journal articles | 2017
    Fox B; Bjekovic R; Elwert M; Middendorf P; Ritter F; Döbel C; Oetting CC; Fürderer K; Hardt M; Rohrmus D, 2017, 'Labs network industry 4.0 e. v. is a partner of the german plattform industrie 4.0', ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 112, pp. 522 - 525,
    Journal articles | 2017
    Jiang E; Amiralian N; Maghe M; Laycock B; McFarland E; Fox B; Martin DJ; Annamalai PK, 2017, 'Cellulose Nanofibers as Rheology Modifiers and Enhancers of Carbonization Efficiency in Polyacrylonitrile', ACS Sustainable Chemistry and Engineering, 5, pp. 3296 - 3304,
    Journal articles | 2017
    Nunna S; Creighton C; Fox BL; Naebe M; Maghe M; Tobin MJ; Bambery K; Vongsvivut J; Hameed N, 2017, 'The effect of thermally induced chemical transformations on the structure and properties of carbon fibre precursors', Journal of Materials Chemistry A, 5, pp. 7372 - 7382,
    Journal articles | 2017
    Nunna S; Creighton C; Hameed N; Naebe M; Henderson LC; Setty M; Fox BL, 2017, 'Radial structure and property relationship in the thermal stabilization of PAN precursor fibres', Polymer Testing, 59, pp. 203 - 211,
    Journal articles | 2017
    Nunna S; Naebe M; Hameed N; Fox BL; Creighton C, 2017, 'Evolution of radial heterogeneity in polyacrylonitrile fibres during thermal stabilization: An overview', Polymer Degradation and Stability, 136, pp. 20 - 30,
    Journal articles | 2017
    Servinis L; Beggs KM; Gengenbach TR; Doeven EH; Francis PS; Fox BL; Pringle JM; Pozo-Gonzalo C; Walsh TR; Henderson LC, 2017, 'Tailoring the fibre-to-matrix interface using click chemistry on carbon fibre surfaces', Journal of Materials Chemistry A, 5, pp. 11204 - 11213,
    Journal articles | 2017
    Wang J; Salim N; Fox B; Stanford N, 2017, 'Anisotropic compressive behaviour of turbostratic graphite in carbon fibre', Applied Materials Today, 9, pp. 196 - 203,
    Journal articles | 2016
    Beggs KM; Perus MD; Servinis L; O'Dell LA; Fox BL; Gengenbach TR; Henderson LC, 2016, 'Rapid surface functionalization of carbon fibres using microwave irradiation in an ionic liquid', RSC Advances, 6, pp. 32480 - 32483,
    Journal articles | 2016
    Eyckens DJ; Champion ME; Fox BL; Yoganantharajah P; Gibert Y; Welton T; Henderson LC, 2016, 'Solvate Ionic Liquids as Reaction Media for Electrocyclic Transformations', European Journal of Organic Chemistry, 2016, pp. 913 - 917,
    Journal articles | 2016
    Gnädinger F; Middendorf P; Fox B, 2016, 'Interfacial shear strength studies of experimental carbon fibres, novel thermosetting polyurethane and epoxy matrices and bespoke sizing agents', Composites Science and Technology, 133, pp. 104 - 110,
    Journal articles | 2016
    Hameed N; Atkiss S; Buckmaster D; Fox B, 2016, 'Carbon Nexus at Deakin University: a globally unique carbon fiber and composite research facility in Australia', Reinforced Plastics, 60, pp. 396 - 400,
    Journal articles | 2016
    Hameed N; Sharp J; Nunna S; Creighton C; Magniez K; Jyotishkumar P; Salim NV; Fox B, 2016, 'Structural transformation of polyacrylonitrile fibers during stabilization and low temperature carbonization', Polymer Degradation and Stability, 128, pp. 39 - 45,
    Journal articles | 2016
    Li C; Zhu H; Salim NV; Fox BL; Hameed N, 2016, 'Preparation of microporous carbon materials via in-depth sulfonation and stabilization of polyethylene', Polymer Degradation and Stability, 134, pp. 272 - 283,
    Journal articles | 2016
    Li Q; Church JS; Naebe M; Fox BL, 2016, 'A systematic investigation into a novel method for preparing carbon fibre–carbon nanotube hybrid structures', Composites Part A: Applied Science and Manufacturing, 90, pp. 174 - 185,
    Journal articles | 2016
    Li Q; Church JS; Naebe M; Fox BL, 2016, 'Interfacial characterization and reinforcing mechanism of novel carbon nanotube – Carbon fibre hybrid composites', Carbon, 109, pp. 74 - 86,
    Journal articles | 2016
    Maghe M; Creighton C; Henderson LC; Huson MG; Nunna S; Atkiss S; Byrne N; Fox BL, 2016, 'Using ionic liquids to reduce energy consumption for carbon fibre production', Journal of Materials Chemistry A, 4, pp. 16619 - 16626,
    Journal articles | 2016
    Naebe M; Abolhasani MM; Khayyam H; Amini A; Fox B, 2016, 'Crack damage in polymers and composites: A review', Polymer Reviews, 56, pp. 31 - 69,
    Journal articles | 2016
    Nuhiji B; Attard D; Deveth A; Bungur J; Fox B, 2016, 'The influence of processing techniques on the matrix distribution and filtration of clay in a fibre reinforced nanocomposite', Composites Part B: Engineering, 84, pp. 1 - 8,
    Journal articles | 2016
    Nunna S; Naebe M; Hameed N; Creighton C; Naghashian S; Jennings MJ; Atkiss S; Setty M; Fox BL, 2016, 'Investigation of progress of reactions and evolution of radial heterogeneity in the initial stage of thermal stabilization of PAN precursor fibres', Polymer Degradation and Stability, 125, pp. 105 - 114,
    Journal articles | 2016
    Palanisamy A; Salim NV; Fox BL; Jyotishkumar P; Pradeep T; Hameed N, 2016, 'A facile method to fabricate carbon nanostructures via the self-assembly of polyacrylonitrile/poly(methyl methacrylate-b-polyacrylonitrile) AB/B′ type block copolymer/homopolymer blends', RSC Advances, 6, pp. 55792 - 55799,
    Journal articles | 2015
    Agius SL; Fox BL, 2015, 'Rapidly cured out-of-autoclave laminates: Understanding and controlling the effect of voids on laminate fracture toughness', Composites Part A: Applied Science and Manufacturing, 73, pp. 186 - 194,
    Journal articles | 2015
    Beggs KM; Servinis L; Gengenbach TR; Huson MG; Fox BL; Henderson LC, 2015, 'A systematic study of carbon fibre surface grafting via in situ diazonium generation for improved interfacial shear strength in epoxy matrix composites', Composites Science and Technology, 118, pp. 31 - 38,
    Journal articles | 2015
    Church JS; Voda AS; Sutti A; George J; Fox BL; Magniez K, 2015, 'A simple and effective method to ameliorate the interfacial properties of cellulosic fibre based bio-composites using poly (ethylene glycol) based amphiphiles', European Polymer Journal, 64, pp. 70 - 78,
    Journal articles | 2015
    Hameed N; Bavishi J; Parameswaranpillai J; Salim NV; Joseph J; Madras G; Fox BL, 2015, 'Thermally flexible epoxy/cellulose blends mediated by an ionic liquid', RSC Advances, 5, pp. 52832 - 52836,
    Journal articles | 2015
    Hameed N; Salim NV; Parameswaranpillai J; Fox BL, 2015, 'Flower like micellar assemblies in poly(styrene)-block-poly(4-vinyl pyridine)/poly(acrylic acid) complexes', Materials Letters, 147, pp. 92 - 96,
    Journal articles | 2015
    Hameed N; Salim NV; Walsh TR; Wiggins JS; Ajayan PM; Fox BL, 2015, 'Ductile thermoset polymers via controlling network flexibility', Chemical Communications, 51, pp. 9903 - 9906,
    Journal articles | 2015
    Hodzic PA; Yousefpour DA; Fox PB, 2015, 'Advanced Manufacturing: Polymer & Composites Science–The First Issue', Advanced Manufacturing: Polymer and Composites Science, 1, pp. 1 - 2,
    Journal articles | 2015
    Khayyam H; Naebe M; Bab-Hadiashar A; Jamshidi F; Li Q; Atkiss S; Buckmaster D; Fox B, 2015, 'Stochastic optimization models for energy management in carbonization process of carbon fiber production', Applied Energy, 158, pp. 643 - 655,
    Journal articles | 2015
    Khayyam H; Naebe M; Zabihi O; Zamani R; Atkiss S; Fox B, 2015, 'Dynamic Prediction Models and Optimization of Polyacrylonitrile (PAN) Stabilization Processes for Production of Carbon Fiber', IEEE Transactions on Industrial Informatics, 11, pp. 887 - 896,
    Journal articles | 2015
    Kim S; Kafi AA; Bafekpour E; Lee YI; Fox B; Hussain M; Choa YH, 2015, 'Wettability investigation of UV/oand acid functionalized MWCNT and MWCNT/PMMA nanocomposites by contact angle measurement', Journal of Nanomaterials, 2015,
    Journal articles | 2015
    Magniez K; Bafekrpour E; Fox BL; Looney MG, 2015, 'Structure-property relationships in nylon 6 nanocomposites based on octaphenyl-, dodecaphenyl-POSS, montmorillonite, and their combinations', Polymer Composites, 36, pp. 153 - 160,
    Journal articles | 2015
    Magniez K; Iftikhar R; Fox BL, 2015, 'Properties of bio-based polymer nylon 11 reinforced with short carbon fiber composites', Polymer Composites, 36, pp. 668 - 674,
    Journal articles | 2015
    Oroumei A; Fox B; Naebe M, 2015, 'Thermal and rheological characteristics of biobased carbon fiber precursor derived from low molecular weight organosolv lignin', ACS Sustainable Chemistry and Engineering, 3, pp. 758 - 769,
    Journal articles | 2015
    Salim NV; Fox BL; Hanley TL, 2015, 'Hydrogen bonding interactions in poly(ε-caprolactone-dimethyl siloxane-ε-caprolactone)/poly(hydroxyether of bisphenol A) triblock copolymer/homopolymer blends and the effect on crystallization, microphase separation and self-assembly', European Polymer Journal, 67, pp. 12 - 20,
    Journal articles | 2015
    Salim NV; Hameed N; Fox BL; Hanley TL, 2015, 'Novel Approach to Trigger Nanostructures in Thermosets Using Competitive Hydrogen-Bonding-Induced Phase Separation (CHIPS)', Macromolecules, 48, pp. 8337 - 8345,
    Journal articles | 2015
    Servinis L; Gengenbach TR; Huson MG; Henderson LC; Fox BL, 2015, 'A novel approach to the functionalisation of pristine carbon fibre using azomethine 1,3-dipolar cycloaddition', Australian Journal of Chemistry, 68, pp. 335 - 344,
    Journal articles | 2015
    Servinis L; Henderson LC; Andrighetto LM; Huson MG; Gengenbach TR; Fox BL, 2015, 'A novel approach to functionalise pristine unsized carbon fibre using in situ generated diazonium species to enhance interfacial shear strength', Journal of Materials Chemistry A, 3, pp. 3360 - 3371,
    Journal articles | 2015
    Yousefpour DA; Fox PB; Hodzic PA, 2015, 'Advanced Manufacturing: Polymer & Composites Science–The Second Issue', Advanced Manufacturing: Polymer and Composites Science, 1, pp. 61 - 62,
    Journal articles | 2015
    Zabihi O; Khayyam H; Fox BL; Naebe M, 2015, 'Enhanced thermal stability and lifetime of epoxy nanocomposites using covalently functionalized clay: Experimental and modelling', New Journal of Chemistry, 39, pp. 2269 - 2278,
    Journal articles | 2015
    Zhang J; Du S; Kafi A; Fox B; Li JL; Liu XY; Rajkhowa R; Wang XG, 2015, 'Surface energy of silk fibroin and mechanical properties of silk cocoon composites', RSC Advances, 5, pp. 1640 - 1647,
    Journal articles | 2015
    de Souza ML; Fox BL, 2015, 'The Surface Finish of Thermally Aged Carbon Fibre Reinforced Composites Using E-glass as a Surface Barrier', Applied Composite Materials, 22, pp. 573 - 582,
    Journal articles | 2014
    BAFEKRPOUR E; YANG C; SIMON GP; ABVABI A; KHOSHMANESH K; FOX BL, 2014, 'A STUDY ON MECHANICAL BEHAVIOR OF FUNCTIONALLY-GRADED CARBON NANOTUBE-REINFORCED NANOCOMPOSITES', International Journal of Computational Methods, 11, pp. 1344003 - 1344003,
    Journal articles | 2014
    Bafekrpour E; Salehi M; Sonbolestan E; Fox B, 2014, 'Effects of micro-structural parameters on mechanical properties of carbon nanotube polymer nanocomposites', Scientia Iranica, 21, pp. 403 - 413
    Journal articles | 2014
    Byrne N; Chen J; Fox B, 2014, 'Enhancing the carbon yield of cellulose based carbon fibres with ionic liquid impregnates', Journal of Materials Chemistry A, 2, pp. 15758 - 15762,
    Journal articles | 2014
    Byrne N; Leblais A; Fox B, 2014, 'Preparation of polyacrylonitrile-natural polymer composite precursors for carbon fiber using ionic liquid co solvent solutions', Journal of Materials Chemistry A, 2, pp. 3424 - 3429,
    Journal articles | 2014
    Chen Z; Dai XJ; Magniez K; Lamb PR; Fox BL; Wang X, 2014, 'Improving the mechanical properties of multiwalled carbon nanotube/epoxy nanocomposites using polymerization in a stirring plasma system', Composites Part A: Applied Science and Manufacturing, 56, pp. 172 - 180,
    Journal articles | 2014
    Huson MG; Church JS; Kafi AA; Woodhead AL; Khoo J; Kiran MSRN; Bradby JE; Fox BL, 2014, 'Heterogeneity of carbon fibre', Carbon, 68, pp. 240 - 249,
    Journal articles | 2014
    Kafi A; Huson M; Creighton C; Khoo J; Mazzola L; Gengenbach T; Jones F; Fox B, 2014, 'Effect of surface functionality of PAN-based carbon fibres on the mechanical performance of carbon/epoxy composites', Composites Science and Technology, 94, pp. 89 - 95,
    Journal articles | 2014
    Li Q; Church JS; Kafi A; Naebe M; Fox BL, 2014, 'An improved understanding of the dispersion of multi-walled carbon nanotubes in non-aqueous solvents', Journal of Nanoparticle Research, 16,
    Journal articles | 2014
    Naebe M; Wang J; Amini A; Khayyam H; Hameed N; Li LH; Chen Y; Fox B, 2014, 'Mechanical Property and Structure of Covalent Functionalised Graphene/Epoxy Nanocomposites', Scientific Reports, 4,
    Journal articles | 2014
    Naghashian S; Fox BL; Barnett MR, 2014, 'Actuation curvature limits for a composite beam with embedded shape memory alloy wires', Smart Materials and Structures, 23,
    Journal articles | 2013
    Agius SL; Magniez KJC; Fox BL, 2013, 'Cure behaviour and void development within rapidly cured out-of-autoclave composites', Composites Part B: Engineering, 47, pp. 230 - 237,
    Journal articles | 2013
    Awaja F; Gilbert M; Naebe M; Kelly G; Fox B; Brynolf R; Pigram PJ, 2013, 'Ageing of surface treated thermoplastic polyolefins', Polymer Degradation and Stability, 98, pp. 1699 - 1704,
    Journal articles | 2013
    Bafekrpour E; Simon GP; Naebe M; Habsuda J; Yang C; Fox B, 2013, 'Preparation and properties of composition-controlled carbon nanofiber/phenolic nanocomposites', Composites Part B: Engineering, 52, pp. 120 - 126,
    Journal articles | 2013
    Bafekrpour E; Simon GP; Yang C; Chipara M; Habsuda J; Fox B, 2013, 'A novel carbon nanofibre/phenolic nanocomposite coated polymer system for tailoring thermal behaviour', Composites Part A: Applied Science and Manufacturing, 46, pp. 80 - 88,
    Journal articles | 2013
    Bafekrpour E; Simon GP; Yang C; Chipara M; Habsuda J; Fox B, 2013, 'Functionally graded carbon nanofiber-phenolic nanocomposites for sudden temperature change applications', Polymer, 54, pp. 3940 - 3948,
    Journal articles | 2013
    Bafekrpour E; Yang C; Natali M; Fox B, 2013, 'Functionally graded carbon nanofiber/phenolic nanocomposites and their mechanical properties', Composites Part A: Applied Science and Manufacturing, 54, pp. 124 - 134,
    Journal articles | 2013
    Chen Z; Dai XJ; Lamb PR; Du Plessis J; De Celis Leal DR; Magniez K; Fox BL; Wang X, 2013, 'Coating and functionalization of carbon fibres using a three-step plasma treatment', Plasma Processes and Polymers, 10, pp. 1100 - 1109,
    Journal articles | 2013
    Chen Z; Dai XJ; Magniez K; Lamb PR; Rubin De Celis Leal D; Fox BL; Wang X, 2013, 'Improving the mechanical properties of epoxy using multiwalled carbon nanotubes functionalized by a novel plasma treatment', Composites Part A: Applied Science and Manufacturing, 45, pp. 145 - 152,
    Journal articles | 2013
    De Souza ML; Mardel JI; Fox BL, 2013, 'Effect of manufacturing method and aging environment on painted automotive carbon fibre composite surfaces', Applied Composite Materials, 20, pp. 747 - 759,
    Journal articles | 2013
    De Souza ML; Mardel JI; Fox BL, 2013, 'Hygrothermal effects on painted carbon fibre composite surfaces', Journal of Composite Materials, 47, pp. 539 - 547,
    Journal articles | 2013
    Garschke C; Parlevliet PP; Weimer C; Fox BL, 2013, 'Cure kinetics and viscosity modelling of a high-performance epoxy resin film', Polymer Testing, 32, pp. 150 - 157,
    Journal articles | 2013
    Hameed N; Church JS; Salim NV; Hanley TL; Amini A; Fox BL, 2013, 'Dispersing single-walled carbon nanotubes in ionic liquids: A quantitative analysis', RSC Advances, 3, pp. 20034 - 20039,
    Journal articles | 2013
    Hameed N; Salim NV; Hanley TL; Sona M; Fox BL; Guo Q, 2013, 'Individual dispersion of carbon nanotubes in epoxy via a novel dispersion-curing approach using ionic liquids', Physical Chemistry Chemical Physics, 15, pp. 11696 - 11703,
    Journal articles | 2013
    Henderson LC; Thornton MT; Byrne N; Fox BL; Waugh KD; Squire JS; Servinis L; Delaney JP; Brozinski HL; Andrighetto LM; Altimari JM, 2013, 'Protic ionic liquids as recyclable solvents for the acid catalysed synthesis of diphenylmethyl thioethers', Comptes Rendus Chimie, 16, pp. 634 - 639,
    Journal articles | 2013
    Magniez K; Voda AS; Kafi AA; Fichini A; Guo Q; Fox BL, 2013, 'Overcoming interfacial affinity issues in natural fiber reinforced polylactide biocomposites by surface adsorption of amphiphilic block copolymers', ACS Applied Materials and Interfaces, 5, pp. 276 - 283,
    Journal articles | 2013
    Naebe M; Sandlin J; Crouch I; Fox B, 2013, 'Novel polymer-ceramic composites for protection against ballistic fragments', Polymer Composites, 34, pp. 180 - 186,
    Journal articles | 2013
    Nuhiji B; Attard D; Thorogood G; Hanley T; Magniez K; Bungur J; Fox B, 2013, 'The effect of a rapid heating rate, mechanical vibration and surfactant chemistry on the structure-property relationships of epoxy/clay nanocomposites', Materials, 6, pp. 3624 - 3640,
    Journal articles | 2013
    Servinis L; Henderson LC; Gengenbach TR; Kafi AA; Huson MG; Fox BL, 2013, 'Surface functionalization of unsized carbon fiber using nitrenes derived from organic azides', Carbon, 54, pp. 378 - 388,
    Journal articles | 2012
    Altimari JM; Delaney JP; Servinis L; Squire JS; Thornton MT; Khosa SK; Long BM; Johnstone MD; Fleming CL; Pfeffer FM; Hickey SM; Wride MP; Ashton TD; Fox BL; Byrne N; Henderson LC, 2012, 'Rapid formation of diphenylmethyl ethers and thioethers using microwave irradiation and protic ionic liquids', Tetrahedron Letters, 53, pp. 2035 - 2039,
    Journal articles | 2012
    Bafekrpour E; Simon GP; Habsuda J; Naebe M; Yang C; Fox B, 2012, 'Fabrication and characterization of functionally graded synthetic graphite/phenolic nanocomposites', Materials Science and Engineering: A, 545, pp. 123 - 131,
    Journal articles | 2012
    Chen Z; Dai XJ; Lamb PR; De Celis Leal DR; Fox BL; Chen Y; Du Plessis J; Field M; Wang X, 2012, 'Practical amine functionalization of multi-walled carbon nanotubes for effective interfacial bonding', Plasma Processes and Polymers, 9, pp. 733 - 741,
    Journal articles | 2012
    Chen Z; Dai XJ; Lamb PR; de Celis Leal DR; Fox BL; Chen Y; du Plessis J; Field M; Wang X, 2012, 'Plasma Process. Polym. 7/2012', Plasma Processes and Polymers, 9,
    Journal articles | 2012
    Garschke C; Weimer C; Parlevliet PP; Fox BL, 2012, 'Out-of-autoclave cure cycle study of a resin film infusion process using in situ process monitoring', Composites Part A: Applied Science and Manufacturing, 43, pp. 935 - 944,
    Journal articles | 2012
    Kafi AA; Chen Z; Dai XJ; Fox BL; Lamb PR; Wang X, 2012, 'Understanding wettability changes from practical plasma functionalization of carbon nanotubes', Nanoscience and Nanotechnology Letters, 4, pp. 344 - 347,
    Journal articles | 2012
    Kafi AA; Magniez K; Cinquemani C; Fox BL, 2012, 'Influence of atmospheric helium plasma on the surface energy of jute fibres and the performance of resulting composites', Journal of Adhesion Science and Technology, 26, pp. 151 - 162,
    Journal articles | 2012
    Kafi AA; Magniez K; Fox BL, 2012, 'Measuring the adhesion force on natural fibre surface using scanning probe microscopy', Journal of Adhesion Science and Technology, 26, pp. 175 - 187,
    Journal articles | 2012
    Magniez K; Fox BL; Looney MG, 2012, 'Nanocomposites of poly(m-xylene diamide) with polyhedral oligomeric silsesquioxane, montmorillonite, and their combination: Structure and properties', Polymer Engineering and Science, 52, pp. 1402 - 1412,
    Journal articles | 2012
    Servinis L; Fox BL; Healy PC; Henderson LC, 2012, 'Methyl 3-[4-(4-nitrobenzyloxy)phenyl]propanoate', Acta Crystallographica Section E: Structure Reports Online, 68,
    Journal articles | 2011
    Francis PS; Hindson CM; Terry JM; Smith ZM; Slezak T; Adcock JL; Fox BL; Barnett NW, 2011, 'Enhanced permanganate chemiluminescence', Analyst, 136, pp. 64 - 66,
    Journal articles | 2011
    Gilbert MJ; Awaja F; Kelly GL; Fox BL; Brynolf R; Pigram PJ, 2011, 'Tailoring the surface chemistry of carbon fiber and E-glass composites for improved adhesion', Surface and Interface Analysis, 43, pp. 856 - 864,
    Journal articles | 2011
    Herring ML; Fox BL, 2011, 'The effect of a rapid curing process on the surface finish of a carbon fibre epoxy composite', Composites Part B: Engineering, 42, pp. 1035 - 1043,
    Journal articles | 2011
    Kafi AA; Magniez K; Fox BL, 2011, 'A surface-property relationship of atmospheric plasma treated jute composites', Composites Science and Technology, 71, pp. 1692 - 1698,
    Journal articles | 2011
    Kafi AA; Magniez K; Fox BL, 2011, 'Effect of manufacturing process on the flexural, fracture toughness, and thermo-mechanical properties of bio-composites', Composites Part A: Applied Science and Manufacturing, 42, pp. 993 - 999,
    Journal articles | 2011
    Magniez K; Chaffraix T; Fox B, 2011, 'Toughening of a carbon-fibre composite using electrospun poly(hydroxyether of bisphenol A) nanofibrous membranes through inverse phase separation and inter-domain etherification', Materials, 4, pp. 1967 - 1984,
    Journal articles | 2011
    Magniez K; Fox BL; Lonney MG, 2011, 'Effect of drawing on the molecular orientation, polymorphism, and properties of melt-spun nanocomposite fibers based on nylon 6 with polyhedral oligomeric silsesquioxane, montmorillonite, and their combination', Polymer Composites, 32, pp. 604 - 614,
    Journal articles | 2011
    Nuhiji B; Attard D; Thorogood G; Hanley T; Magniez K; Fox B, 2011, 'The effect of alternate heating rates during cure on the structure-property relationships of epoxy/MMT clay nanocomposites', Composites Science and Technology, 71, pp. 1761 - 1768,
    Journal articles | 2010
    Adamson BP; Fox BL, 2010, 'An evaluation of the performance of advanced melded composite joints', Composite Structures, 92, pp. 2071 - 2076,
    Journal articles | 2010
    Agius SL; Magniez KJC; Fox BL, 2010, 'Fracture behaviour of a rapidly cured polyethersulfone toughened carbon fibre/epoxy composite', Composite Structures, 92, pp. 2119 - 2127,
    Journal articles | 2010
    Awaja F; Gilbert M; Kelly G; Fox B; Brynolf R; Pigram PJ, 2010, 'Exploring molecular changes at the surface of polypropylene after accelerated thermomolecular adhesion treatments', ACS Applied Materials and Interfaces, 2, pp. 1505 - 1513,
    Journal articles | 2010
    Herring ML; Mardel JI; Fox BL, 2010, 'The effect of material selection and manufacturing process on the surface finish of carbon fibre composites', Journal of Materials Processing Technology, 210, pp. 926 - 940,
    Journal articles | 2010
    Magniez K; De Lavigne C; Fox BL, 2010, 'The effects of molecular weight and polymorphism on the fracture and thermo-mechanical properties of a carbon-fibre composite modified by electrospun poly (vinylidene fluoride) membranes', Polymer, 51, pp. 2585 - 2596,
    Journal articles | 2010
    Zhang J; Guo Q; Fox B, 2010, 'Thermal and mechanical properties of a dendritic hydroxyl-functional hyperbranched polymer and tetrafunctional epoxy resin blends', Journal of Polymer Science, Part B: Polymer Physics, 48, pp. 417 - 424,
    Journal articles | 2010
    Zhang J; Guo Q; Huson M; Slota I; Fox B, 2010, 'Interphase study of thermoplastic modified epoxy matrix composites: Phase behaviour around a single fibre influenced by heating rate and surface treatment', Composites Part A: Applied Science and Manufacturing, 41, pp. 787 - 794,
    Journal articles | 2009
    Awaja F; Gilbert M; Fox B; Kelly G; Pigram PJ, 2009, 'Investigation of the postcure reaction and surface energy of epoxy resins using Time-of-flight secondary ion mass spectrometry and Contact-angle measurements', Journal of Applied Polymer Science, 113, pp. 2755 - 2764,
    Journal articles | 2009
    Awaja F; Gilbert M; Kelly G; Fox B; Pigram PJ, 2009, 'Adhesion of polymers', Progress in Polymer Science (Oxford), 34, pp. 948 - 968,
    Journal articles | 2009
    Awaja F; Van Riessen G; Fox B; Kelly G; Pigram PJ, 2009, 'Time-of-flight secondary ion mass spectrometry investigation of epoxy resin curing behavior in real Time', Journal of Applied Polymer Science, 113, pp. 2765 - 2776,
    Journal articles | 2009
    Brighton A; Forrest M; Starbuck M; Erdman D; Fox B, 2009, 'Strain rate effects on the energy absorption of rapidly manufactured composite tubes', Journal of Composite Materials, 43, pp. 2183 - 2200,
    Journal articles | 2009
    Kafi AA; Hurren CJ; Huson MG; Fox BL, 2009, 'Analysis of the effects of atmospheric helium plasma treatment on the surface structure of jute fibres and resulting composite properties', Journal of Adhesion Science and Technology, 23, pp. 2109 - 2120,
    Journal articles | 2009
    Li L; Dai XJ; Xu HS; Zhao JH; Yang P; Maurdev G; Plessis JD; Lamb PR; Fox BL; Michalski WP, 2009, 'Combined continuous wave and pulsed plasma modes: For more stable interfaces with higher functionality on metal and semiconductor surfaces', Plasma Processes and Polymers, 6, pp. 615 - 619,
    Journal articles | 2009
    Magniez K; Fox BL; Looney MG, 2009, 'Nonisothermal crystallization behavior of poly(m-xylene adipamide)/montmorillonite nanocomposites', Journal of Polymer Science, Part B: Polymer Physics, 47, pp. 1300 - 1312,
    Journal articles | 2009
    Magniez K; Fox BL; Looney MG, 2009, 'Silver sulfide as a staining agent for scanning electron microscopy of nylon 6/MXD6 blends', Polymer International, 58, pp. 858 - 862,
    Journal articles | 2009
    Zhang J; Fox BL; Gao D; Stevenson AW, 2009, 'Inspection of drop-weight impact damage in woven CFRP laminates fabricated by different processes', Journal of Composite Materials, 43, pp. 1939 - 1946,
    Journal articles | 2009
    Zhang J; Guo Q; Fox B, 2009, 'Structural and material properties of a rapidly cured Thermoplastic- toughened epoxy system', Journal of Applied Polymer Science, 113, pp. 485 - 491,
    Journal articles | 2009
    Zhang J; Guo Q; Fox BL, 2009, 'Study on thermoplastic-modified multifunctional epoxies: Influence of heating rate on cure behaviour and phase separation', Composites Science and Technology, 69, pp. 1172 - 1179,
    Journal articles | 2008
    Awaja F; Gilbert M; Kelly G; Fox B; Brynolf R; Pigram PJ, 2008, 'Surface properties of polypropylene following a novel industrial surface-treatment process', Surface and Interface Analysis, 40, pp. 1454 - 1462,
    Journal articles | 2008
    Awaja F; Van Riessen G; Kelly G; Fox B; Pigram PJ, 2008, 'Tof-sims investigation of epoxy resin curing reaction at different resin to hardener ratios', Journal of Applied Polymer Science, 110, pp. 2711 - 2717,
    Journal articles | 2008
    Zhang J; Fox B; Guo Q, 2008, 'Consistent model predictions for isothermal cure kinetics investigation of high performance epoxy prepregs', Journal of Applied Polymer Science, 107, pp. 2231 - 2237,
    Journal articles | 2007
    Corbett T; Forrest M; Gac PL; Fox BL, 2007, 'Characterization of melded carbon fibre/epoxy laminates', Composites Part A: Applied Science and Manufacturing, 38, pp. 1860 - 1871,
    Journal articles | 2007
    Silcock MD; Garschke C; Hall W; Fox BL, 2007, 'Rapid composite tube manufacture utilizing the quickstepTM process', Journal of Composite Materials, 41, pp. 965 - 978,
    Journal articles | 2007
    Zhang J; Fox BL, 2007, 'An experimental study of low velocity impact response in 2/2 twill weave composite laminates manufactured by a novel fabrication process', Journal of Materials Science, 42, pp. 232 - 238,
    Journal articles | 2006
    Silcock M; Hall W; Fox B; Warrior N, 2006, 'Finite element modelling of metallic tubular crash structures with an explicit code', International Journal of Vehicle Safety, 1, pp. 292 - 303,
    Journal articles | 2006
    Zhang J; Fox BL, 2006, 'Characterization and analysis of delamination fracture and nanocreep properties in carbon epoxy composites manufactured by different processes', Journal of Composite Materials, 40, pp. 1287 - 1299,
    Journal articles | 2005
    Zhang J; Fox BL, 2005, 'Effect of the manufacturing process on the interlaminar fracture toughness of 2/2 twill weave fabric carbon/epoxy composites', Materials Forum, 29, pp. 216 - 221
    Journal articles | 2004
    Fox B; Lowe A; Hodgkin J, 2004, 'Investigation of failure mechanisms in aged aerospace composites', Engineering Failure Analysis, 11, pp. 235 - 241,
    Journal articles | 1997
    Fox B; Moad G; Van Diepen G; Willing I; Cook WD, 1997, 'Characterization of poly(ethylene terephthalate) and poly(ethylene terephthalate) blends', Polymer, 38, pp. 3035 - 3043,
    Journal articles | 1996
    Cook WD; Moad G; Fox B; Van Deipen G; Zhang T; Cser F; Mccarthy L, 1996, 'Morphology-property relationships in ABS/PET blends. II. Influence of processing conditions on structure and properties', Journal of Applied Polymer Science, 62, pp. 1709 - 1714, http://dx.doi.org/10.1002/(SICI)1097-4628(19961205)62:10<1709::AID-APP22>3.0.CO;2-V
    Journal articles | 1996
    Cook WD; Zhang T; Moad G; Deipen GV; Scer F; Fox B; O'Shea M, 1996, 'Morphology-property relationships in ABS/PET blends. I. Compositional effects', Journal of Applied Polymer Science, 62, pp. 1699 - 1708, http://dx.doi.org/10.1002/(SICI)1097-4628(19961205)62:10<1699::AID-APP21>3.0.CO;2-W
    Journal articles | 1996
    Cook WD; Zhang T; Moad G; Van Deipen G; Cser F; Fox B; O'Shea M, 1996, 'Morphology-property relationships in ABS/PET blends. I. Compositional effects', Journal of Applied Polymer Science, 62, pp. 1699 - 1708, http://dx.doi.org/10.1002/(sici)1097-4628(19961205)62:10<1699::aid-app21>3.3.co;2-x
    Journal articles | 1994
    Yan XF; Fox BL; Tiekink ERT; Young CG, 1994, 'Synthesis and crystal structure of tris(diethyldithiocarbamato-S,S′)(disulfido-S,S′)niobium(V)', Journal of the Chemical Society, Dalton Transactions, pp. 1765 - 1767,
    Journal articles | 1994
    Young CG; Yan XF; Fox BL; Tiekink ERT, 1994, 'The melding of dithiocarbamate and alkyne moieties at molybdenum centres; new ligands and heterometallacyclic complexes', Journal of the Chemical Society, Chemical Communications, pp. 2579 - 2580,
  • Conference Papers | 2022
    Ackermann AC; Fischer M; Wick A; Carosella S; Fox BL; Middendorf P, 2022, 'INVESTIGATION OF THE THERMAL AND MECHANICAL PROPERTIES OF COMPOSITE MATERIALS WITH AMINE-FUNCTIONALIZED REDUCED GRAPHENE OXIDE INCLUSIONS', in ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability, pp. 967 - 974
    Conference Papers | 2020
    Reghat M; Hameed N; Hyde L; Middendorf P; Bjekovic R; Fox B; Weizman Y; Tan AM; Fuss FK, 2020, 'Smart graphene enabled preforms', in ECCM 2018 - 18th European Conference on Composite Materials
    Conference Papers | 2019
    Ackermann AC; Carosella S; Middendorf P; Fox BL, 2019, 'Effect of surface functionalization of graphene particles on the properties of nanocomposites', in ICCM International Conferences on Composite Materials
    Conference Papers | 2019
    Choi J; Varley RJ; Al-Assafi S; Fox B; Naebe M, 2019, 'Effect of curing agents in different molecular structure on epoxy resin based solid electrolyte for structural composite battary application', in ICCM International Conferences on Composite Materials
    Conference Papers | 2019
    Creighton C; Lynch P; Nunna S; Fox B; de Jong M; Mudie S, 2019, 'Micro-waxs study of structural heterogeneity in single pan-precursor and subsequent carbon fiber', in International SAMPE Technical Conference
    Conference Papers | 2019
    Creighton C; Papenbreer L; Warnecke M; Fox BL; Varley RJ, 2019, 'Evaluation of the effect of tension during carbon fibre processing', in ICCM International Conferences on Composite Materials
    Other | 2019
    Fox B, 2019, Making stronger carbon-fiber precursors, ,
    Conference Papers | 2019
    Lux B; Fial J; Schmidt O; Carosella S; Middendorf P; Fox B, 2019, 'Comparison of picture frame devices and analysis of locking angle for fabrics with different cross-ply angles', in ICCM International Conferences on Composite Materials
    Conference Papers | 2015
    Baiuk AA; Al-Ameri R; Fox B, 2015, 'Experimental investigation on bonding properties of reactive liquid rubber epoxy in CFRP retrofitted concrete members', in FRPRCS-12/APFIS-2015 - Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures, FRPRCS 2015 and the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures, APFIS 2015
    Conference Papers | 2015
    Creighton C; Weimer C; Parlevliet PP; Fox BL, 2015, 'Understanding the flow properties of a thermoplastic-toughened epoxy resin film through model-based analysis', in ICCM International Conferences on Composite Materials
    Conference Papers | 2015
    Fox BL; Salim NV; Hameed N; Nunna S; Creighton C; Naebe M; Lynch P; Stanford N; Wang J; Naghashian S, 2015, 'Microcracking in resins and matrices; Progress towards understanding the relative influence of carbon fibre properties and sizing', in CAMX 2015 - Composites and Advanced Materials Expo, pp. 1350 - 1357
    Conference Papers | 2015
    Jennings MJ; De Souza ML; Creighton C; Agius SL; Pierlot AP; Fox BL, 2015, 'Resin fillet formation in honeycomb sandwich structures', in ICCM International Conferences on Composite Materials
    Conference Papers | 2015
    Kafi A; Magniez K; Chaffraix T; Fox B, 2015, 'Surface treatment of pan based carbon fibers with sulfonated octaphenyl poss', in CAMX 2015 - Composites and Advanced Materials Expo, pp. 2494 - 2508
    Conference Papers | 2015
    Radjef R; Fox B; McArthur S, 2015, 'Physical and chemical properties of carbon fibres modified by electrolytic oxidation and air plasma treatment', in ICCM International Conferences on Composite Materials
    Conference Papers | 2014
    Badii K; Naebe M; Golkarnarenji G; Dhami N; Atkiss S; Buckmaster D; Fox B; Khayyam H, 2014, 'Energy Saving in Electric Heater of Carbon Fiber Stabilization Oven', in Proceedings - 2014 4th International Conference on Artificial Intelligence with Applications in Engineering and Technology, ICAIET 2014, pp. 109 - 114,
    Conference Papers | 2014
    Fox B; Henderson L; Servinis L; Huson M; Dunstan B; Atkiss S, 2014, 'Carbon nexus: A strategic overview and research highlights', in CAMX 2014 - Composites and Advanced Materials Expo: Combined Strength. Unsurpassed Innovation.
    Conference Papers | 2014
    Wild G; Fox B; Magniez K; Hinckley S; Wade S; Carman G, 2014, 'Investigating strain transfer in polymer coated structures for the health monitoring of aerospace vehicles using polymer photonic waveguides', in 2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings, pp. 622 - 626,
    Conference Papers | 2013
    Al-Kharabsheh B; Baiuk A; Al-Ameri R; Fox B, 2013, 'Improving performance of CFRP retrofitted RC members using rubber modified epoxy (On going research)', in Proceedings of the 4th Asia-Pacific Conference on FRP in Structures, APFIS 2013
    Conference Papers | 2013
    Chen Z; Dai XJ; Lamb PR; du Plessis J; Leal DRDC; Li L; Magniez K; Fox BL; Wang X, 2013, 'Coating of carbon fibres using a novel three-step plasma treatment', in Fiber Society Spring 2013 Technical Conference
    Conference Papers | 2013
    Creighton C; Kafi A; Fox B, 2013, 'Effect of electrolytic oxidation and sizing on the mechanical performance of carbon fibre composites', in Fiber Society Spring 2013 Technical Conference
    Conference Papers | 2013
    Huson M; Church J; Kafi A; Khoo J; Mangalampalli K; Bradby J; Fox B, 2013, 'Physical and chemical heterogeneity of carbon fibre', in 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8, pp. 3339 - 3345,
    Conference Papers | 2013
    Jennings M; de Souza M; Creighton C; Agius S; Pierlot T; Fox B, 2013, 'Characterisation of composite honeycomb sandwich structures cured using the quickstep process', in Fiber Society Spring 2013 Technical Conference
    Conference Papers | 2013
    Kafi A; Creighton C; Huson M; Fox B, 2013, 'A multiscale approach to quantify friction properties of carbon fibres', in Fiber Society Spring 2013 Technical Conference
    Conference Papers | 2013
    Kafi A; Henderson L; Servinis L; Huson M; Gengenbach T; Khoo J; Garschke C; Fox B, 2013, 'New surface treatments for low cost carbon fiber', in International SAMPE Technical Conference, pp. 456 - 469
    Conference Papers | 2013
    Li Q; Church J; Kafi A; Naebe M; Fox B, 2013, 'Interfacial improvement of carbon fiber/epoxy composites by using electrospray carbon nanotube deposition', in Fiber Society Spring 2013 Technical Conference
    Conference Papers | 2013
    Servinis L; Henderson LC; Gengenbach TR; Kafi AA; Huson MG; Fox BL, 2013, 'Functionalisation of carbon fiber toward enhanced fiber-matrix adhesion', in Fiber Society Spring 2013 Technical Conference
    Conference Papers | 2012
    Bafekrpour E; Kafi AA; Simon GP; Yang C; Habsuda J; Naebe M; Fox BL, 2012, 'Preparation and properties of stepwise graded synthetic graphite/phenolic nanocomposites', in ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
    Conference Papers | 2012
    Bafekrpour E; Simon GP; Naebe M; Habsuda J; Yang C; Fox B, 2012, 'Composition-optimized synthetic graphite/polymer nanocomposites', in Annual Technical Conference - ANTEC, Conference Proceedings, pp. 437 - 441
    Conference Papers | 2012
    Bafekrpour E; Simon GP; Yang C; Habsuda J; Naebe M; Fox B, 2012, 'Effect of compositional gradient on thermal behavior of synthetic graphite-phenolic nanocomposites', in Journal of Thermal Analysis and Calorimetry, pp. 1169 - 1176,
    Conference Papers | 2010
    Finn N; Barnes S; Miller J; Osterlund J; Corbett T; Naebe M; Fox B, 2010, '3-D seamless knitted preforms for automotive seating applications', in Proceedings of the 3rd World Conference on 3D Fabrics and Their Applications, pp. 29 - 33
    Conference Papers | 2010
    Magniez K; De Lavigne C; Fox BL, 2010, 'Properties of a carbon-fibre composite modified by electrospun poly (Vinylidene Fluoride)', in AIP Conference Proceedings, pp. 22 - 24,
    Conference Papers | 2010
    Sudharsan R; Fox BL; Hodgson PD, 2010, 'High strain rate tensile properties of rapidly cured woven carbon fibre composites', in International SAMPE Symposium and Exhibition (Proceedings)
    Conference Papers | 2007
    Brighton A; Luedtke B; Brosius D; Starbuck M; Erdman D; Fox B, 2007, 'Strain rate effects on the energy absorption of rapidly manufactured composite tubes', in SPE Automotive and Composites Divisions - 7th Annual Automotive Composites Conference and Exhibition, ACCE 2007 - Driving Performance and Productivity, pp. 877 - 889
    Conference Papers | 2007
    Corbett T; Forrest M; Fox BL, 2007, 'Investigation of processing conditions of melded parts to determine process boundaries', in Materials and Manufacturing Processes, pp. 777 - 781,
    Conference Papers | 2007
    Zhang J; Fox BL, 2007, 'Manufacturing influence on the delamination fracture behavior of the T800H/3900-2 carbon fiber reinforced polymer composites', in Materials and Manufacturing Processes, pp. 768 - 772,
    Conference Papers | 2006
    Silcock MD; Hall W; Fox BL, 2006, 'Finite element modeling of composite tubular crash structures with an explicit code', in 6th Annual SPE Automotive Composites Conference 2006, pp. 669 - 682
    Conference Papers | 2005
    Magniez K; Fox BL; Looney MG, 2005, 'Novel nanocomposite fibres for technical textile applications: Synthesis and characterisation of poly(m-xylene adipamide) montmorillonite nanocomposites', in 5th World Congress: Enabling Technologies and New Markets, Nanocomposites 2005
    Conference Papers | 2002
    Lowe A; Fox B; Otieno-Alego V, 2002, 'Interfacial ageing of high temperature carbon/bismaleimide composites', in Composites Part A: Applied Science and Manufacturing, pp. 1289 - 1292,
    Preprints |
    Motevalli B; Fox BL; Barnard A, Charge-Dependent Fermi Level of Graphene Oxide Nanoflakes from Machine Learning, ,